Books & VideosPatternsAbout SilhouettesFeaturesNotionsOrder Here

Peggy Sagers carries hard-to-find 60" wide fusible interfacing and tie interfacing for easing sleeve caps. French Curves are also available for your pattern drafting and alterations projects.

See Below

Tips for Fusible Interfacing
by Peggy Sagers

Cutting and Interfacing Guide
I recommend you use weights instead of pins to secure pattern to fabric. Books are a great substitute if you do not have weights. I recommend that you lay your 60" fusible interfacing out underneath your fabric (NOT LINING) and cut all layers of fabric and interfacing out at the same time. There are several reasons why fusible interfacing is recommended:

1. Fusible knit interfacing is used to decrease wrinkles in certain fabrics.

2. Fusible knit interfacing is used to give extra body and stabilize fashion fabrics.

3. Fusible knit interfacing is used to change the drape of a fabric.

4. If in doubt use fusible knit interfacing -- you will love the finished product!

As soon as you have cut your fabric, go to the ironing board and adhere all interfacing pieces. This will stabilize fabric and prevent stretching. No stay stitching is necessary. No press cloth is needed. You need to preshrink ALL fusible knit interfacing. To do this lay fabric on ironing board with RIGHT SIDE down. Lay interfacing on top of fabric, glue side should be down to WRONG SIDE of fabric. Dampen interfacing with a spray bottle filled with water. (Water contact is all that is necessary to cause interfacing to shrink. You must dampen the interfacing prior to adhesion or else interfacing will shrink after adhesion and cause fabric to bubble.) Set iron for the temperature compatible to the fabric. Starting at one end of the fabric, press for 10 seconds, continue by covering small sections until all areas have been adhered. Then iron the right side of the fabric to be sure interfacing has adhered. (Interfacing WILL shrink a small amount. No need to worry, this WILL NOT affect garment construction.)

60" wide fusible interfacing is available below.

or Call 1-800-STITCH-5 (1-800-784-8245) to order.

 

Fusible Interfacing

Fusible Interfacing 60" wide. Available in black or white. Sold by the yard.

$5.00 per yard
Minimum order of 5 Yards
(discount for quantities of 10yds & above)
Plus Shipping

Tie Interfacing

Tie Interfacing for easing sleeve caps.
Sold by the yard.

$9.00 per yard
Plus Shipping

French Curve

This french curve is perfect for all of your pattern drafting and alterations projects.

$15.00 each
Plus Shipping

 

Shoulder Pads Now Available!

1" thick shoulder pads available in black or white. order several today and save!

$3.00 per pair
Plus Shipping & Handling

 

Zippers Now Available!

16" Zippers now available in white or black tape, with silver or brass teeth. Choose any combination!

$3.00 each
Plus Shipping & Handling

 
 

$149.95 each
Plus Shipping & Handling

 

 

MY SHOPPING CART

Books & Videos | Patterns | About Silhouettes | Monthly Feature | Notions

Copyright © 2000-2004 Silhouette Patterns